GFW national standard plain woven stainless steel wire mesh/screen/industrial metal wire woven screen model types and standards introduction

GFW national standard plain weave stainless steel wire mesh/screen/industrial metal wire weaving screen model types and standards introduction
GFW national standard plain weave stainless steel wire mesh is also known as screen, industrial metal wire weaving screen, metal wire weaving square hole screen.
GFW stainless steel screen GB/T-5330-2003 industrial metal wire weaving square hole screen. Its specifications are commonly used: GFW+screen model+material brand+weaving method.
For example: GFW 3.15/0.8-304 plain weave means: industrial square hole screen model: 3.15mm/0.8mm stainless steel 304 material plain weave mesh.
This standard is applicable to the screening of solid particles, filtration of liquids and gaseous substances and other industrial purposes of metal wire weaving screen square hole mesh. The basic mesh size is: 0.02-16mm industrial metal wire weaving square hole mesh.
Material: 201, 304, 321, 316, 316L, 12Cr17Mn6Ni5N, 12Cr17Ni7, 12Cr18Ni9, 06Cr19Ni10, 022Cr19Ni10, 06Cr17Ni12Mo2, 022Cr17Ni12Mo2, 06Cr17Ni12Mo2Ti, 022Cr19Ni13Mo3, 06Cr23Ni13, 06Cr25Ni20, 06Cr18Ni11Ti, 06Cr18Ni11Nb... stainless steel wire.
Specification: 0.6m-2.0m width 1-200 mesh
GB/T-5330-2003 industrial metal wire woven square hole screen products are woven by plain or twill weaving process, with good air permeability, light transmission and other properties, the product is high-grade and widely used.

Uses:
1. Used for screening and filtering under acidic and alkaline conditions, used as mud nets in the petroleum industry, as screens and filters in the chemical and chemical fiber industries, and electroplating...
2. Used in mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries. ...
3: Used for screening and filtering under acidic and alkaline conditions, used as mud nets in the petroleum industry, as screens in the chemical and chemical fiber industries, and as pickling nets in the electroplating industry. Our factory can design and manufacture various types of products according to user needs...

GB/T-5330-2003 Industrial Wire Weaving Square Hole Screen Available from Stock:
GFW3.15/0.8 06cr18ni11ti
GFW2/0.5 06cr18ni11ti
GFW6.3/1.8 06cr18ni9ti
GFW3.15/1.25 06cr18ni9ti
GFW0.8/0.28 0cr18ni9
GFW0.8/0.315 0cr18ni9
GFW1.25/0.5 0cr18ni9
GFW0.63/0.224 304
GFW0.25/0.16 304 GFW0.2
/0.11 304
GFW4.08/1.0 321
GFW 0.8/0.28 Plain Weave 304
GFW 0.8/0.315 Plain 304
GFW1.25/0.5 Plain 304
GFW 2.26/0.91 Plain 321
GFW0.315/0.2 Plain 316L
GFW 1.6/10 Plain 316
GFW3.0/0.7 Plain 316

Stainless steel wire mesh products have a lot of professional terminology, such as aperture diameter, wire diameter, opening rate, etc. The common markings are: d represents the wire diameter and w represents the aperture. For example, the stainless steel wire mesh produced by the wire mesh factory is marked as SD40/25, which means that the wire diameter of the wire mesh is 25 microns and the aperture is 40 microns.

GFW stainless steel wire mesh metal mesh GF1W, GF2W, GF3W metal wire woven square hole mesh is mainly used for solid particle screening, fluid filtration, decoration, dust prevention, skeleton support, etc. Only 1 grade stainless steel wire mesh screen is produced strictly according to the standard GB/T5330-1985 requirements to produce R10, R20, R20/3, R40/3 screen mesh series, mesh size 10mm-0.022mm (2-550 mesh),

Industrial metal wire woven square hole screen The current national wire mesh standards are:
GB/T5329-1985 "Test sieves and screening test terms"
GB/T-5330-2003 Industrial metal wire woven square hole screen replaces GB/T5330-1985 Industrial metal wire woven square hole screen
GB/T6003-1997 Industrial metal wire woven long hole screen
GB/T5330.1-2000 Industrial metal screen and metal wire woven mesh mesh size and metal wire diameter combination selection guide
GB/T 5725.-1997 Safety net
GB/T6003.1-1997 Metal wire woven mesh test sieve
GB/T6003.2-1997 Metal perforated plate test sieve
GB/T6003.3-1999 Electroformed thin plate test sieve
GB/T 6005-1997 Basic dimensions of mesh holes of wire mesh, perforated plate and electroformed sheet for sieving
JB/T58951-1992 Industrial metal screens and wire mesh products.