Introduction to types of wire braided conveyor belts

Introduction to types of wire braided conveyor belts

1. Crankshaft mesh belt: It concentrates various advantages of metal wire woven mesh belt. Due to the deep curved strings, the position of each spiral wire rod is correctly positioned, thus minimizing the deformation and extension of the mesh belt.

2. Straight-axis mesh belt: It is made of alternating left and right mesh strips connected by straight strings. This series of mesh belts has dense meshes and uniform mesh spacing, which can make the mesh belt run smoothly. This series of mesh belts is suitable for conveyor lines with small load-bearing volume and relatively heavy texture.

3. Flat wire mesh belt: This mesh belt is made of rolled flat wire and connected with crankshaft-type threading strips. It has fine workmanship, flat surface, parallel sides, excellent material and is durable.

4. Type B mesh belt: also known as trapezoidal mesh belt or straight mesh belt, this mesh belt is usually a gear transmission mesh belt, which has the advantages of good air permeability, uniform tension, fine workmanship, flexible rotation, good stability, high temperature resistance, pressure resistance, corrosion resistance, and long service life.

5. Herringbone mesh belt: It is made of alternating mesh strips connected by four straight strings. The precise weaving technology makes the mesh belt have the characteristics of high density, fine mesh and flexible operation. It has extremely high requirements on materials and weaving technology. This mesh belt is suitable for conveying lines with small loads.

6. Metal mesh belt: Also known as the Great Wall mesh, it is composed of flat metal sheets and round metal wires. The mesh belt has a light weight, large mesh gaps, a flat surface, and runs smoothly without deviation. It can be used as a conveyor line for washing, drying, cooling, and heat treatment.

7. Chain rod mesh belt: This chain rod mesh belt adopts chain transmission, which is suitable for large and heavy transmission. It has smooth movement and great power. The mesh surface is relatively small in force, which can protect the conveying mesh surface. It is more expensive, but has a long service life.

8. Eye-shaped mesh belt: sprocket driven, stable operation, strong bearing capacity, can transport high-speed heavy objects, smooth surface, suitable for the transportation of unstable products, large opening rate, good ventilation and dehydration, easy to clean, the eye-shaped mesh belt is very suitable for the coating operation process because of its large holes, which can reduce the contact with the conveyor belt as much as possible.

9. Chain-type mesh belt: This type of chain uses chain as power. The mesh is connected with chain pieces and small tubes; the spacing can be customized according to use. There are many specifications.

10. Chain type mesh belt: The conveyor mesh belt driven by the chain is generally driven by the chain to drive the small shaft and then drive the mesh belt to run. The mesh belt is made of rolled teeth string, two strings of left and right mesh bars, and connected with large and small mesh bars. The small shaft is inserted into the large mesh bar, and the two ends of the small shaft are inserted into the chain holes, so as to achieve the chain drive conveyor mesh belt. The chain net has a stable transmission and a small transmission torque.

11. U-shaped chain mesh belt, which can also be used as spiral mesh belt, is produced by imported computer mesh belt machine. The mesh surface is strong and durable and not easy to deform. The biggest feature is good turning performance, which can achieve 180-degree turning and stable operation. It has a flat mesh surface and can bear heavy pressure and tension. It has good ventilation and air permeability, the mesh surface is clean and non-toxic, and easy to clean. It is extremely convenient to repair and disassemble. Sidewalls can be added on both sides of the mesh belt according to customer requirements.

12. Chain plate mesh belt: driven by stainless steel chain and made of stainless steel plates, it is suitable for conveying small high-density objects. It runs smoothly during the conveying process, is easy to install and replace, has a high price and a long service life.

13. Baffle type mesh belt: This hard edge treatment makes the conveying method intuitive and simple. The baffle is S-shaped to form a straight groove. Mechanical extrusion should be avoided during use. Once the falling phenomenon is found, it should be handled in time.

14. Triangular strip mesh belt: This edge treatment has the advantages of being light and firm. It is suitable for conveying larger workpieces. Objects are not easy to slip from the edge. It has fine workmanship, reliable quality and reasonable price. It is widely used in conveying in the food industry and metal heat treatment industries.

15. Rod-type mesh belt: It has the characteristics of simple structure, good air permeability, high strength, capable of carrying heavier objects, easy to clean and maintain, and flexible operation.

16. Flanged mesh belt: Generally, it is a combined balanced type of four-strand single-headed mesh belt. The strings do not go through the edge and the edges on both sides are 15-30 cm high to prevent objects from falling out. For example, chemical fiber factories, standard parts heat treatment, bearing parts cleaning machines use flanged mesh to prevent the spillage of chemical fibers, etc.

17. Spherical mesh belt: A spherical spiral combined mesh composed of four spiral wire rods. It has a firm structure and a large effective filtration area. It is mainly used for filtration in the chemical industry and drying in vacuum dryers. It has been widely used in viscose fiber folding machines and dryers in the leather industry.

18. Support belt mesh belt: The mesh surface of the support belt is smooth and smooth, and it runs flexibly. The production level of equipment and molds is the quality guarantee of this mesh belt. This series of mesh belts has a large load capacity and relatively wide mesh holes, and is suitable for large conveyor lines.

19. Plate-added mesh belt: also called reinforced mesh belt, this mesh belt string can be straight string or curved string, the mesh belt edge can be made into baffles, the mesh belt can be turned over as a whole, and the string can be produced and processed into stepped edges (twisted edges), which can be determined according to the user's use range and temperature!

20. Single-twist mesh belt: This mesh belt is made of single-twist, with uniform texture and strong tensile strength; the two sides are parallel; and the surface is flat.

21. Diamond mesh belt: also known as chain link fence and active mesh.