Gas and liquid filter use

Gas and liquid filter use

The vapor-liquid filter mesh is referred to as the SP standard wire mesh, knitted metal mesh, flat wire woven mesh, vapor-liquid mesh , also known as the foam breaking mesh , foam removal mesh , foam catching mesh , and gas-liquid filter mesh. It is a wire mesh woven in a crochet weaving manner . The diameter of the stainless steel wire commonly used is between 0.5mm and 0.30mm . The width of the mesh is: 100mm, 150mm, 300mm, 400mm, 450, 500mm, 550mm, 600mm,2000mm; the size of the mesh hole is: 2*4mm, 4*5mm, 7*12mm and other hole types. The woven mesh surface is pressed with 20~45 degree bevel angle 4~7mm deep corrugation.

Gas-liquid filter is widely used in: foam breaking, gas-liquid separation, gas-water separation, oil-gas separation in mechanical equipment in distillation, evaporation, absorption and other processes in petroleum, chemical industry, light industry, medicine, metallurgy, aerospace, shipbuilding, environmental protection engineering. It is placed in the tower body to make a defoamer to break bubbles and restore them to droplets to ensure the efficiency of mass transfer, reduce the loss of valuable materials, reduce the volume of the tower body or container, and improve the working conditions of the equipment.

The most commonly used models are 40-100, 60-150, and 140-400. With the continuous improvement of industrial civilization, the application field of gas-liquid filter has developed greatly. Gas-liquid filter is not only the only main component used in the production of wire mesh demisters and other separation projects. Now it is more used in oil removal, dust removal and other environmental protection occasions, and is an important component in the automotive industry's sealing, shock absorption (shockproof), silencer, exhaust purification system and airbags. It is also widely used in shielding devices for electromagnetic interference protection of electronic and electrical products. With the continuous development of industrial level, people have more and more new understandings of the applicable fields and application scope of gas-liquid network.

Gas and liquid filter use

Gas-liquid filter is used in the compressor industry:

The gas-liquid filter can be used to make oil-gas separator filters in compressors, oil-gas separator demisting filters, gas-liquid separator filters, oil-water separator filters, and air purifier filters.

Gas-liquid filter is used in the mechanical industry:

Gas-liquid filter screens can be used in various mechanical manufacturing fields such as oil-gas separator screens, oil-gas separator demisting screens, gas-liquid separator screens, oil-water separator screens, air purifier screens, shock pads, shock absorbing rings, wire mesh rings, various wire mesh compression elements, and wire mesh seals. The products are also widely used in the automotive industry and aerospace industry.

Steam and liquid filters are used in the shipbuilding industry:

Gas-liquid filter screens are used in oil-water separator screens, marine and large-scale seawater desalination devices, oil-gas separator screens, gas-liquid separator screens, and oil-water separator screens in the shipbuilding industry .

Gas-liquid filters are used in the fields of electronics and electrical appliances:

Shielded ventilation windows / waveguide windows, wire mesh shielding gaskets, strip shielding materials, wire mesh shielding tapes, conductive cloth-wrapped elastomers, and conductive rubber in the field of electromagnetic shielding .

Vapor-liquid filters are used in the fields of catalysts and distillation:

Separate droplets from gas during filtering, screening, catalysis, distillation, evaporation, absorption and other processes in various industries; ensure gas circulation, etc.

The factory has more than hundreds of weaving machines of different specifications and models, which can meet the needs of different users. For various non-standard gas-liquid filter products provided by users, such as multi-strand braiding, mixed braiding and weaving, various shapes of sealing gaskets, sleeves, etc., we can test-produce gas-liquid filter types of components made according to bulk density, specific surface area, and porosity based on mesh and wire diameter measurements.

With the reform and opening up, new foreign technologies are widely used in China. The standard used for gas-liquid filters is the Shanghai enterprise standard. The original standard number is Shanghai Q/SG12-1-79 , which was replaced by the new standard Shanghai Q/YSZZ-88-91 in 1991. Yinrui Wire Mesh Factory has accumulated a large number of technical parameters of gas-liquid filters in the process of decades of production practice. In addition to the specifications specified in the standards for users to choose from, our factory also has more than 100 specifications and models of wire mesh demister gas-liquid filters for users to choose from. We can also scientifically select the appropriate gas-liquid filter model for customers based on the samples or requirements provided by customers.